Resonance-wood: Difference between revisions

From Cybis Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
(7 intermediate revisions by 2 users not shown)
Line 1: Line 1:
'''Resonance wood''' or '''tone wood''' refers to the top of for instance violins. It is almost always [[Picea abies]] (in rare cases other species as for instance [[Abies alba]] may have been used). As the ring pattern often is visible at the instruments, it is possible to measure the ring widths directly at the instrument or via high resolution photos. Large amounts of tone wood has been traded from several source areas in Europe - in the alps and other forest areas in central Europe. Famous violin areas like [[Mittenwald]] and [[Markneukirchen]] may mainly have used rather local wood (and exported not only violins but also wood), but there will surely be exceptions. The altitude of those areas located in Germany and around may be at about 1000-1500 m.
Resonance wood or tonewood refers to the harmonic table of many types of musical instruments, including those of the plucked, struck and bowed string type, such as guitars, lutes, keyboard and violin family instruments. The species used is almost always Norway Spruce ([[Picea abies]] (L.)Karst), though some firs such as [[Abies alba]] have occasionally been used.  
As a rule, radially cut timber is used on harmonic tables.  That way, the growth rings are easily visible and the distance between each other measurable, either microscopically, or via high high resolution photos. Large amounts of tonewood have been traded over the centuries, emanating from several European mountainous areas, from the Alps towards central Europe.
Dendrochronological results strongly suggest that some areas associated with large musical instrument production, such as [[Mittenwald]] and [[Markneukirchen]], mainly used wood grown fairly locally.  There is also good evidence that wood from these areas also found its way into other European countries.  


Good tone wood should, beside good acoustic characteristics, also have a steady increment growth with as little variations as possibly and with straight fibers so not the wedges will look like propellers... The average ring width use to be 1-2 mm. Typical is also low density.
Good tonewood, besides having good acoustical characteristics, often displays a fairly steady narrow or narrowing growth, with an average ring width of about 1 to 2mm, occasionally narrower, with a straight grain.  Low density associated with stiffness across the grain is also a desirable attribute.
Some harmonic tables also display slight ripples of the grain, known as “bear claw” or “hazel-fichte”.  Some people associate this feature with high quality resonance wood, as it is found on several master instruments.
 
Violin fronts are most commonly made out of two “book-matched” pieces. Logs are split or cut into wedges, these wedges are again divided and jointed so as to show a symmetrical pattern on both halves. The youngest rings (which will often be narrowly spaced) will be situated in the middle of the table by the center joint.  In this case, correlation analysis between the two sides will result in highly significant values. Although this is the commonest situation, many other permutations occur.  Fronts made out of one single piece, fronts made out of two piece, not book matched but showing the signs of coming from a single tree, and also fronts out of two pieces of completely unrelated wood, sometimes showing no statistical or graphical correlation.


The most common way to build a violin top is to cut the same piece of wood into two halves and glue them together so that the youngest ring will be found in the middle. It also happens that wood from different trees are used and that pieces of wood are glued in other ways. In the normal case, with "butterflied" halves glued together - the measurements of the both sides of the instrument will show very high correlation values.


===See also===
===See also===

Latest revision as of 01:24, 24 November 2010

Resonance wood or tonewood refers to the harmonic table of many types of musical instruments, including those of the plucked, struck and bowed string type, such as guitars, lutes, keyboard and violin family instruments. The species used is almost always Norway Spruce (Picea abies (L.)Karst), though some firs such as Abies alba have occasionally been used.

As a rule, radially cut timber is used on harmonic tables. That way, the growth rings are easily visible and the distance between each other measurable, either microscopically, or via high high resolution photos. Large amounts of tonewood have been traded over the centuries, emanating from several European mountainous areas, from the Alps towards central Europe. Dendrochronological results strongly suggest that some areas associated with large musical instrument production, such as Mittenwald and Markneukirchen, mainly used wood grown fairly locally. There is also good evidence that wood from these areas also found its way into other European countries.

Good tonewood, besides having good acoustical characteristics, often displays a fairly steady narrow or narrowing growth, with an average ring width of about 1 to 2mm, occasionally narrower, with a straight grain. Low density associated with stiffness across the grain is also a desirable attribute. Some harmonic tables also display slight ripples of the grain, known as “bear claw” or “hazel-fichte”. Some people associate this feature with high quality resonance wood, as it is found on several master instruments.

Violin fronts are most commonly made out of two “book-matched” pieces. Logs are split or cut into wedges, these wedges are again divided and jointed so as to show a symmetrical pattern on both halves. The youngest rings (which will often be narrowly spaced) will be situated in the middle of the table by the center joint. In this case, correlation analysis between the two sides will result in highly significant values. Although this is the commonest situation, many other permutations occur. Fronts made out of one single piece, fronts made out of two piece, not book matched but showing the signs of coming from a single tree, and also fronts out of two pieces of completely unrelated wood, sometimes showing no statistical or graphical correlation.


See also